REGISTER NOW – Limited Places

Following the success of the Mt Coot-tha Quarry site visit in 2020, ATS Queensland is again excited to invite members to Quarry Day 2023 on 31 August 2023 proudly supported and sponsored by our prime sponsor DESOI.

The day is aimed at graduate and early career professionals and will cover a range of equipment and technical demonstrations. These will feature:

Rock fissure and crack injection – DESOI

Shotcrete pumping and application – JEMNA

Lithium battery exposed to high temperature – STACEY AGNEW

Use of drones in a construction setting – UNIVERSITY OF QUEENSLAND

Rock drilling – OPTIONX

Rock drilling – VERMEER

MASTER BUILDERS SOLUTIONS + BLUEY TECHNOLOGIES ANZ

Products – BluCem HS200 RMX, BluCem HS200, MasterSeal 345

BluCem HS200 RMX, is a ready mix product which arrives pre-mixed in concrete agitators on site to form an ultra-flow cementitious grout. BluCem RMX HS200 is a pumpable, high strength product suitable for civil engineering applications. BluCem RMX HS200 incorporates advanced additives to form a cementitious grout which is free of alluminate and metallic expansion agents or methocel based additives providing a product suitable for 100 year design life applications.

BluCem HS200, is a one component powder product which requires only the addition of water to form an ultra flow cementitious grout. BluCem HS200 is a pumpable, high strength product suitable for civil engineering applications. BluCem HS200 incorporates advanced additives to form a cementitious grout which is free of alluminate and metallic expansion agents or methocel based additives providing a product suitable for 100 year design life applications.

A coffee van in the morning available in the quarry (kindly supported by the exhibitors).

Note: All delegates will be required to wear long pants, closed toe safety boots and a long sleeve shirt. Reasonable fitness and mobility is required as the tour involves walking through a working quarry.

Schedule

The day will be split into two parts:

Session 1 – Commence 0800 Induction.

In the quarry with a chance to meet the supplier and see hands on demonstrations;

Lunch – Mt Coo-tha Cafe; and

Session 2 – Presentations from the demonstrators and suppliers covering the morning’s activities with the opportunity for Q&A.

Finish 1530

Note that demonstrations and presentations are subject to change on the day.

Prime Sponsor

IS YOUR PARTNER FOR INJECTION TECHNOLOGY